6 Common John Deere 2130 Problems: How to Solve Them?

Be it for working livestock, snow removal, or carrying hays from place to place, you’ll always find the John Deere tractors top-notch in field efficiencies. But some common issues could arise as you use the vehicle for a long time. Don’t worry; you can solve them quickly.

Talking about john deere 2130 problems, the hydraulic problem has been the most common among the users and in our testing. When the excess load gets on the tractor, the engine and power of the tractor become shaky. Sometimes, the engine doesn’t even start. 

Solving them isn’t a big issue. You can do that once you know the reason and source of the problem. And the main motive of this article is to pave that path.

John Deere 2130 Problems: Quick Overview

Here, you have a list of common problems you can face in your John Deere 2130. Check the issues along with their quick solution measures. 

Solving the Problems of John Deere 2130

Here, we will discuss all the problems mentioned in the table in detail. Also, will discuss the potential solutions which may help you to take the right measure to solve the issues quickly. 

1. Hydraulic Problem

Hydraulic in your JD 2130 tractor is one of the core functioning systems that regulate the whole running and working activities. Any system disruption will bring you severe complications and a stoppage of the casual working schedule with your truck.

Coming with the list of problems due to a broken hydraulic system, you’ll experience high fluid temperature. That’s because of the internal leakage, which will eventually increase the system’s heat load.

Uneven noises happen sometimes; the lubrication goes on to be missing, creating friction to the brakes and other engine-regulated parts. Apart from the noise, friction damages the parts and reduces their lifespan.

Solution:

You have to check where the leakage is coming from. Fill the reservoir with oil and identify the leak. Find the place of issue, seal it completely with proper means, or change the leaked part completely.

To maintain the temperature properly inside, it is recommended to pour oil at a normal temperature. It will resist any kind of friction and will balance the temperature when the tractor is running.

2. Insufficient Engine Power

The engine breaks down due to overload and can’t bear the stress of moving at a reasonable speed. This increases the engine’s temperature as well, which at one point completely stops the vehicle.

Again, if your tractor is not getting sufficient air intake through the engine, it becomes overheated for that as well. A clogged filter and valve are responsible for causing the problem.

Solution:

• Don’t overload your tractor. You know the vehicle’s weight limit; put the load as instructed on it. Besides that, keep the engine filter and valve clean. Remove all the clogging from the inside.
• Clean the clogged filters and valve of the engine. Ensure a feasible flow of air through the valve to reduce and maintain the system’s heat. 

3. High Fuel Consumption

Using improper fuel in the tractor won’t serve you properly. Because the engine won’t be able to cope with the fuel and ultimately waste much of the liquid.

Again, a high load on the truck will put more pressure on the engine. And the engine will tend to consume more fuel from the reservoir to cope with stress. Sometimes, the electrical fuel system problem causes much leakage as well.

Solution:

First, you need to reduce the load to save a lot of oil from engine use. Then, you must ensure that you use the proper oil type for your John Deere 2130 tractor. 10w/40 Universal Tractor Oil can be a suitable type for the tractor.

If your electrical fuel system gets broken, you have to change it. Hardly can you fix the thing and expect to sustain it for a long-time; it would be a loss project anyways.

4. Engine Not Starting

One of the common reasons tractors or car engines don’t start is because of freezing. When you keep the tractor unused for a long time, the motor freezes and becomes jammed.

Again, there could be wiring issues for the motor. The electric connection detaching means your engine won’t get any power to spark and start properly.

A blown fuse could be another issue that helps the problem to exist. If so, then your whole tractor won’t be starting.

Solution:

• You have to heat the engine continuously. For that, keep on starting the tractor and increase the engine temperature. Once it gets heated up, it’ll catch the command and run.
• Fix any kind of wire detachment from the engine. You can inspect that typically. For wire cuts, change the wire and do the reconnection.
• There is no solution to fix a blown fuse. Straight up, change the fuse, and install a new one.

5. Battery Issues

As you use the tractor occasionally, the battery will come up with various issues. Overeating water is a common problem due to cracked battery cases. Again, suppose the battery charging rate is too high. In that case, you are also expected to lose more water within a specific time.

Charging the battery sometimes hampers when the connection of the battery is loose. The same can happen to a worn-out battery after using it for a long time.

Solution:

For the cracked battery, you need to check the moisture of the battery. If it remains unsatisfied, change the whole battery.

There are chances you might lose connections to the battery wires. For that, ensure a tight connection every time you finish maintenance with the battery.

For other problems, you have to test the battery under specific calibrations. As per the result, decide whether to repair the battery or change it.

6. Overheating Problem

You have coolant in your tractor to maintain the temperature inside. But, when the coolant stays at a high temperature, you can’t expect the vehicle to remain at a constant temperature. 

Thus, your vehicle overheats. It can’t cope with the engine stress. The same also happens when the coolant level is low.

Suppose the vehicle’s poly-vee belt is pretty much stressed or pressurized. In that case, the engine will try to generate more pressure to keep it stable. And that will generate more heat for the vehicle.

A broken temperature gauge and an improper cooling system will not be able to cool down the temperature of your vehicle.

Solution:

• Use a clean and proper amount of coolant in your tractor. Remove any kind of debris or clogging from inside the valve.  Decrease the engine stress by exerting the proper load on the tractor. That’ll decrease heat generation.
• Check the automatic belt tensioner from time to time. For any kind of disruption or irrelevant result, change the belt.
• And finally, flush the cooling system to ensure a proper and feasible re-manageable cooling system. For the broken thermostat and temperature, change them.

Final Words

Like other machines, the John Deere 2130 is prone to some common issues. Knowing the reasons can help you to fix them quickly. You read the reasons and causes, and now you can identify the issue in your tractor by matching them.

Remember, don’t increase the problem by making a mess of the current state. You must ensure your health and safety while dealing with the wire, engine, and other parts. If you can’t handle or get the solution, no worries; the maintenance team at the auto repair shop garage is there for you.